AHEB Series IO Expansion Board_ A&E Specifications Version 1.0 20230623
0.67MB
03 / 13 / 2024
Added Successfully
General Information | |
Primary Power | 12 - 24 VDC ± 20%, 550 mA maximum |
RS-485 Connectivity | Input: RS-485 standard / OSDP V2.2
(Dedicated for AHSC-1000/ AHDU series controller communication)
Output: RS-485 standard / OSDP V2.2
(Dedicated for AHEB series I/O expansion board communication) |
Number of Ports | 1*RS-485
16*supervised input (AUX IN)
2*relay output (AUX OUT)
1* power Input (PWR IN)
1*power output (PWR OUT)
1*power detection (AC Fail)
1* backup battery detection (BAT Fail)
1*tamper input (TMPR) |
Inputs | 16 inputs 4 state supervision, resistor values (5% tolerance),
Normally open contact: use 1.2k, 2.2k. 4.7k or 10k
Normally closed contact: use 1.2k, 2.2k. 4.7k or 10k |
Outputs | 2 relays
2* Form-C with dry contacts |
AHSC/ AHDU Interface | |
RS-485 Protocol | AES-128, OSDP V2 Secure Channel |
OSDP Mode | 9600-115200 bps, OSDP V2.2, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit.
Maximum cable length: 2,000 ft. (609.6m) |
Data Inputs | OSDP supported.
Maximum cable length: 500 ft. (152m) |
Cable Requirement | |
Power & Relays | 12 - 24 VDC ± 20%, 550 mA maximum |
RS-485 Port | One twisted pair with drain wire and shield, 120 ohm resistance, 22-18 AWG,
Maximum cable length: 3937ft (1200m) |
Mechanical | |
Dimensions | 7.6” W x 4.6” L x 0.7” H (193 x 116 x 17.5mm) |
Weight | 5.8oz (165.3g) |
Mounting | Wall Mount |
Environmental | |
Temperature | −4°F~131°F（-20°C~55°C）, Operating & Storage
|
Humidity | 0-95% RHNC |
Certification(s) | CE, FCC, RoHS, UL294 |
Security Rating | Data Storage Encrypted with Certified EAL6+ Crypto Chipset |
Software Interface | |
Supported Software | Armatura One Security System, Cielo365 (coming soon) |